Bug-o-systems Universal Bug-O-Matic Manual do Utilizador descarregar pdf (Página 26)

BUG-5960 TUBE CARRIAGE / EXPLODED VIEW / PARTS LIST

The Tube Carriage features a split carriage body for quick and easy placement on the rail. It has a carrying

capacity of 100 lb (45 kg). The carriage also offers six (6) wheel positions for circumferential applications

over a wide range of diameters. Use with BUG-O Aluminum Rigid, Semi-Flex or Bent Rigid Rails.

ITEM QTY PART NO DESCRIPTION

1 1 BUG-5908A Plate Assembly (Incl. Spring x2

& Dowel Pin x2, not shown)

2 1 BUG-5907 Skirt, Right

3 1 BUG-5964 Skirt, Left

4 2 BUG-5918 Fixed Wheel Assembly

5 2 BUG-5920 Adj. Wheel Assembly

6 1 BUG-5961 Modied Cam Handle

7 1 BUG-5962 Cam Stop Block

8 1 BUG-5963 Swing Eye Bolt

9 1 BUG-5916 Dowel Pin

10 1 ARM-2316 Thrust Race

11 1 FAS-1353 Hex Nut, 1/4-20

12 2 FAS-0537 Screw, Soc Hd Cap 10-24 x 3/4

INSTALLING THE BUG-5960 DRIVE CARRIAGE

1. Select the correct pair of holes on each side of the carriage for the rail diameter being used (see

chart). If the wheels are not attached to the correct set of holes, remove them and bolt the wheel

brackets in selected holes. Tighten the bolts until the brackets are snug, but still free to rotate.

2. Open the cam handle to separate the

carriage. On the drive unit, loosen and turn

the clutch knob counterclockwise to declutch

the drive pinion.

3. Place the carriage on the rail with the wheels

in the rail grooves. Close the cam handle

and move the carriage back and forth a

few inches. The wheels on their mounting

brackets will align themselves correctly in

the rail grooves.

4. Verify that wheels are properly aligned, then

tighten the wheel mounting bolts

to lock them in position. Rotate the clutch

knob clockwise to engage the drive pinion

with the rack.

5. Verify that pinion is properly engaged in the rack. The correct wheel position will provide a minimum

of 1/8" engagement (approx. 3 mm) between the drive pinion and the gear rack. Note: For some rail

or pipe sizes, the pinion height may need to be adjusted.

Carriage

Wheel

Hole Set

BRR-1210

Rail ID

Pipe OD

in mm in mm

A 20 - 25 500 - 635 9 - 21 230 - 530

B 23 - 35 585 - 890 12 - 31 300 - 790

C 30 - 44 760 - 1120 18 - 40 455 - 1015

D 41 - 60 1040 - 1525 29 - 54 735 - 1375

E 75 - 174 1905 - 4420 64 - 170 1625 - 4320

F at rail at rail

Note: Chart values are for reference only

1 2 ... 21 22 23 24 25 26 27 28 29 30 31

Comentários a estes Manuais

Sem comentários

Bug-o-systems Universal Bug-O-Matic Manual do Utilizador Página 26

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Bug-o-systems Universal Bug-O-Matic